fyrkrok med handduk uppsatt i badrum

Care instructions

Follow our care instructions to extend the lifetime of your Beslagsboden product

Beslagbodens products are cleaned by wiping with a soft cloth and lukewarm water and possibly with a soap solution. We recommend that you use microfiber cloth to reduce the use of cleaning agents.
When cleaning agents must be used, they should have a pH value between 7.5-9.5 and not contain abrasives.

Cleaning options

  • A. Microfiber cloth dry, alternatively slightly moistened with water.
  • B. Microfiber cloth moistened with water. Finish with a dry microfiber cloth.
  • C. Spray the surface with water, wipe with microfiber cloth.
självhäftande toalettpappershållare i krom

Choose cleaning products and tools with care

The choice of cleaning agents and tools has a great impact on the end result. For weekly cleaning, we recommend that the surface is wiped with a soft microfiber cloth, in order to reduce the use of detergent. Avoid cleaning tools such as steel wool and fiber sponges as they can cause permanent damage and scratches to the surface.

When it comes to cleaning agents, lukewarm water is usually enough. For more extensive cleaning, a mild pH-neutral cleaning agent with a value between 7.5–9.5 without abrasives may be used. The surface does not tolerate alkaline, acidic, chlorine or alcoholic cleaning agents as they can cause stains and damage to the surface, therefore exclude these. If you use this type of cleaning in the bathroom, make sure you protect the products from splashes.

Cleaning procedure

  • Wipe the surface with a slightly damp microfiber cloth with lukewarm water.
  • When cleaning agents are used, they should have a pH value between 7.5-9.5 and not contain abrasives.
  • Carefully remove the detergent with cold water.
  • Wipe the product with a dry microfiber cloth to avoid limescale stains.
kromade knoppar i unik design i modernt betongkök

Chrome and stainless steel

In the case of dirt or limescale stains on chrome and stainless steel, they are most easily removed with a cleaning agent intended for this. Read the instructions carefully and always try the cleaning agent on a small surface first. Household vinegar (max. 12%) is also effective against limescale stains. Rub in, leave on, rinse with clean water and dry with a microfiber cloth. Always avoid solvents, such as hard scouring pads and abrasive powders.

innerdörrhandtag i mässing på grå dörr

Brass

Brass is corrosion sensitive material, which means that over time, brass gets a beautiful patina that can be polished with brass ceaner. Beslagsbodens brass products, on the other hand, are highly polished and lacquered, which preserves the appearance. It is therefore extra important never to use strong cleaning agents with abrasives in brass care. In addition to leaving marks on the product, it can also remove the protective lacquer surface. Rather choose a mild pH-neutral detergent without abrasives or soap solution.